Brytyjski design | Głośniki wydajnościowe | Eksperci od 1972 roku
Please refer to the illustrations below for the ideal angles and positions of each speaker in your surround system. The speakers should be distanced from the wall according to the requirements of the speaker, which are listed in the 2-Channel Positioning section.
If the sound is too bass heavy or there is a bass boom from the room when playing music (without a subwoofer), try moving the loudspeakers slightly further away from the wall(s). If this is not possible, then try the supplied port bungs. In a system with a subwoofer, try adjusting the crossover frequency settings for the speakers and/or subwoofer or changing the subwoofer’s position.
The Bronze C150 centre speaker should be positioned so that it is pointing at the approximate ear height of the main listening position. Included with the Bronze C150 are 4 adhesive feet; stick these to the bottom of the cabinet for protection and to help isolate the speaker. NOTE: Images are for illustrative purposes only. If using the Bronze FX, please refer to the ‘Setting Up the Bronze FX’ section for further information.
A 7.1 surround system will make use of side (position A) and rear speakers (position B). If setting up a 5.1 system, you can place your surrounds in position (A) or (B).
If you were unable to find an answer to your query in our Bronze Series 6G support section or you require any further assistance, please contact our technical team via email at technical@monitoraudio.group or give us a call on +44 1268 740580.