GXW15
Years Active 2010-2015
In this gloriously glossy, rigid compact subwoofer, is an ultra-long throw 15” C-CAM bass driver, triple suspended and under the control of a 650W D2Audio® Class D amplifier.
Technology
- Ultra long throw 15” C-CAM (Ceramic-Coated Aluminium/Magnesium) driver featuring triple suspension
- Large black anodized 3” voice coil and double stack motor system provides high power handling and low distortion
- Carefully optimized motor system design to reduce heat and improve efficiency
- Powerful 650Watt DSP Controlled amplifier (D2 Audio™)
- Advanced full bridge switch mode power supply (SMPSU) Capable of delivering over 1200 watt peak power
- 12V trigger - provides switching control from A.V amp or processor
- Rigid, 25 mm (1”) thick M.D.F construct
- Heavy radial cabinet bracing with separate amplifier partition
- Front mounted control panel for easy access and viewing
- The LEO™ system provides Automatic Room Mode Correction (ARMC) for easy set up and perfect sound quality
- Remote control with 4 user EQ settings
- Selected real wood veneer or high gloss piano finishes
Égalisation
4 Settings (Off/Music/Movie/Impact)
Contrôle de phase
0-90-180-270 degrees
Exigences d'entrée de détection automatique
Line Level > 2mV. Standby after 10 minutes if no signal sensed
Niveau de volume numérique
-60 to +10 dB in 1 dB increments
Transducteurs
1 x 15” C-CAM sub-woofer driver featuring triple suspension
3” long throw voice coil
Entrée de déclenchement
3.5 mm mono jack socket
Connexion
Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Impédance d'entrée
20 K Ohms
Dimensions (H x L x P)
431.8 x 419.1 x 419.1 mm (17 x 161/2 x 161/2 Inches)
Profondeur de la grille
28 mm (11/8 Inches)
Poids
35.3 kg (77.6 lbs)
Tension d'entrée secteur
100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Certifications électriques
CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Consommation
Maximum 1000 W. Standby < 0.5 W (ErP Compliance)
Valeur des fusibles
20 mm UL/VDE (Value is region specific)
Kod zdalnego sterowania IR
NEC SH6122