Monitor MRW-10
Years Active 2018-2020
The muscular Monitor MRW-10 powered subwoofer delivers a thunderous bass down to below 30 Hz and offers a totally immersive movie, music, or gaming experience.
The Monitor MRW-10’s rigid cabinet is made from 18 mm thick MDF and accommodates a 10" long-throw MMP II bass driver and a rear port that allows optimal output from the powerful on-board 100 W class D power amplifier.
The Monitor MRW-10 boasts an array of features dedicated to optimising a home theatre system. There are three pre-set EQ mode settings (Music, Movie, Impact) to offer a level of adjustment for all rooms and tastes, and the controls use an advanced DSP based architecture to provide the ultimate in audio flexibility.
This product is now available to use with home theatre design software, The CEDIA Designer. Read more.
System Format
Rear ported bass reflex cabinet
Lower Frequency Limit
30 Hz (-6 dB)
Upper Frequency Limit
Variable 50 – 120 Hz @ 24 dB/Octave
Amplifier Output
100 W RMS
Amplifier Classification
Class D with Switch mode PSU
Bass EQ Profiles
Music / Movie / Impact
Phase Control
0 – 180°
Auto Sensing
>3.5 mV
Input Level Requirements
Standby after approximately 15 minutes if no signal sensed
Drive Unit Complement
1 x 10" MMP II long throw driver
Input Impedance
>20 K ohms
Mains Input Voltage
110 – 120 Vac – 50 – 60 Hz
220 – 240 Vac – 50 – 60 Hz. Selectable
Fuse Specification
110 – 120 VAC – T4AL/250VAC
220 – 240 VAC – T4AL/250VAC
Connection
2 x Stereo RCA, 1 x LFE RCA connection
12 V trigger (3.5 mm mono mini-jack)
External Dimensions (Including Grille and Feet (H x W x D))
336 x 320 x 350.6 mm (131/4 x 125/8 x 1313/16")
Standby Power Consumption
<0.5 W standby
Weight
10.54 kg (23 lb 4 oz)
Sold As
Single Unit
