MASS W200
Years Active 2012-2019
The W200 is a subwoofer with a potent 220 W DSP controlled Class D amplifier. It powers a side-firing 10" long throw C-CAM bass driver equipped with a huge, dual stack magnet system. Complementing the active driver is a 10" Auxiliary Bass Radiator (ABR). Select ‘music’, ‘movie’ and ‘impact’ pre-set response curves using a back-panel switch.
This product is now available to use with home theatre design software, The CEDIA Designer. Read more.
Technology
- C-CAM cone technology
- 10" flat ABR (Auxiliary Bass Radiator)
- Tuned for tight, fast bass punch
- 220 watt class-D power amplifier
- DSP providing accurate filter characteristics
- Advanced limiters designed to ensure the W200 never loses control.
- 3 x pre-set bass modes (Music, Movie, Impact)
- 12V trigger input – ensures W200 switches on and off with other equipment.
- Heavy duty MDF construction
- Discreet black cloth finish.
System Format
Active sub-woofer system - Auxilary (ABR) loading. 18 mm MDF cabinet (CARB2 approved)
Lower Frequency Limit
30 Hz (-6 dB)
Upper Frequency Limit
Variable 40 - 120 Hz @ 24 dB/Octave
Amplifier Output
220 watts @ 1% THD+N
Amplifier Classification
Class - D amplifier with Switch mode power supply (SMPSU)
Bass EQ Profiles
Music / Movie / Impact
Phase Control
0-180 degrees
Auto Sensing
Line Level >3.5 mmV
Input Level Requirements
Standby after approx. 20 minutes if no signal sensed
Drive Unit Complement
1 x 10" (250 mm) C-CAM Long Throw Driver
1 x 10" (260 mm) Auxilary bass radiator
Input Impedance
> 20 ohms
Mains Input Voltage
100 - 120 Vac / 220 - 240 Vac 50/60Hz (Factory Region Present)
Dimensions (Including Grilles and Feet (H x W x D))
420 x 385 x 385 mm (169/16 x 163/16 x 163/16")
Connection
Stereo RCA in, LFE in, 12v Trigger in (3.5 mono mini-jack)
Trigger Input
5 12v via 3.5 via mono mini-jack socket
Power Consumption
200 watts / 0.5 watts in Standby (ErP approved)
Weight
15.96 kg (35 lb 2 oz)
