Gold W15
Years Active 2014-2018
It may deliver taut gut-churning bass all the way down to a seismic 18 Hz, but the Gold W15 is also an intelligent design, featuring an advanced automatic room correction system called LEO™ (Listening Environment Optimizer).
LEO simply and automatically eliminates the detrimental bass boost of boundaries and corners through the use of a microphone and test tones.
The Gold W15's sealed enclosure and front-firing driver make it easy to install, and calibration from the front-mounted controls and dimmable LED display is simple, even from a distant position. It's equipped with a 12 V trigger and remote control with four user EQ pre-sets.
Ce produit est désormais intégré au logiciel de création home cinéma The CEDIA Designer. Cliquez ici pour plus d’informations.
Technology
- Ultra long throw 15" C-CAM (Ceramic-Coated Aluminium/Magnesium) driver featuring triple suspension
- Large black anodized 3" voice coil and double stack motor system provides high power handling and low distortion
- Carefully optimized motor system design to reduce heat and improve efficiency
- Powerful 650 Watt DSP Controlled amplifier (D2 Audio™)
- Advanced full bridge switch mode power supply (SMPSU) Capable of delivering over 1200 watt peak power
- 12 V trigger - provides switching control from A.V amp or processor
- Rigid, 25 mm (1") thick M.D.F construct
- Heavy radial cabinet bracing with separate amplifier partition
- Front mounted control panel for easy access and viewing
- The LEO™ system provides Automatic Room Mode Correction (ARMC) for easy set up and perfect sound quality
- Remote control with 4 user EQ settings
- Selected real wood veneer or high gloss lacquer finishes.
System Format
Sealed Cabinet. 25 mm M.D.F construction with internal bracing. Sealed amplifier compartment
Lower Frequency Limit
18 Hz
Upper Frequency Limit
40 — 120 Hz Variable
Low Pass Filter Alignment
Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Output
650 watts Continuous. 1200 watts Peak
Amplifier Classification
D2AudioTM DSP controlled, Class-D amplifier system. High current switch mode power supply (SMPSU)
Equalisation
4 Settings (Off/Music/Movie/Impact)
Phase Control
0-90-180-270 degrees
Auto Sensing Input Requirements
Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level
-60 to +10 dB in 1 dB increments
Drive Unit Complement
1 x 15" C-CAM sub-woofer driver featuring triple suspension
3" long throw voice coil
Trigger Input
3.5 mm mono jack socket
Connection
Stereo RCA in/out
LFE in/out
12 V Trigger in (3.5 mm mono jack)
LEO* - 3.5 mm Microphone input jack (microphone supplied)
Input Impedance
20 K Ohms
Dimensions (H x W x D)
430 x 400 x 400 mm (1615/16 x 153/4 x 153/4")
Grille Depth
28 mm (11/8")
Mains Input Voltage
100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications
CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption
Maximum 1000 W. Standby < 0.5 W (ErP Compliance)
Fuse Type
20 mm UL/VDE (Value is region specific)
IR Remote Control Code
NEC SH6122
Weight (unpacked)
35.3 kg (77 lb 10 oz)
