British Design | Performance Loudspeakers | Experts Since 1972
The Bronze FX features di-pole or bi-pole listening modes. In bi-pole mode, both the driver and tweeters are all in phase. In dipole mode, the tweeter on one side of the speaker is out of phase with the other tweeter and driver to create a diffused sound. The FX speakers should be wall mounted approximately 2 feet above ear height.
Di-Pole/Bi-Pole switch: When used as part of 5.1 systems as a rear speaker, set the switch to Bi-Pole. Although there is nothing wrong with experimenting and trying the switch in the di-pole mode. If part of a 7.1 system with 1 pair of Bronze FX's, set the switch to di-pole.
If using 2 pairs of Bronze FX’s for side and rear effects, set them all to di-pole mode and swap the left and right-handed side Bronze FX’s. Keep the rear Bronze FX’s handed correctly, as illustrated here.
NOTE: Before adjusting any switches, please ensure that the amplifier is switched off. This will help to protect the amplifier.
If you were unable to find an answer to your query in our Bronze Series 6G support section or you require any further assistance, please contact our technical team via email at technical@monitoraudio.group or give us a call on +44 1268 740580.